CAR PARK BARRIERS
axis is a distributor and approved installer for FAAC car park barriers.
FAAC is the world’s leading designer, manufacturer and supplier of access automation systems, with over 40 years’ experience and thousands of systems installed. All FAAC products are manufactured to the ISO 9001 quality standard and are renowned for their durability and reliability.
On this page we show details of two barrier products:
-
620 Barrier System – for up to 5 metres (click to view); and
-
640 Barrier System - for up to 7 metres (click to view)
All FAAC automation products are robust, reliable and manufactured to the international quality standard ISO9001
620 Range Fast Acting Hydraulic Barrier System
for Beams up to 5 metres
The 620 Barrier System is the ideal solution for heavy traffic flows. Standard, Rapid or Super Rapid versions providing solutions for the most demanding site. |
The 620 Range - Barrier for beams up to 5m. - For heavy traffic applications
INSTALLATION LAYOUT
 |
|
|
|
|
|
|
|
 |
|
||||||
 |
Low voltage cabling |  |
Power cabling 230V |  |
|
||
 |
 |
|
|||||
 |
3 cables 3 x 0.5 1 cable 2 x 0.5 |
 |
1 cable 2 x 1.5+T 1 cable 2 x 1.5 |
|
|||
 |
 |
|
|||||
| NB: Cable diameters in mm2 | |
||||||
 |
|
||||||
1. FAAC 620 with built in 624 BLD control board
2. Beam
3. FAAC LIGHT
4. FAAC T10
5. FAAC
FOTOSWITCH
Speed and Versatility The 620 hydraulic barrier range is fast and reliable with a capability to support up to a 5m beam.
The 620 Standard with a duty cycle of 70% will support a 5m beam and bottom skirt with an opening/closing speed of 4 seconds.
The 620 Rapid offers a beam length of up to 4m with an opening / closing speed of 2 seconds. The 620 Super Rapid will support a 3m beam and operate in 0.8 seconds.
Long Term Reliability The 620 range is equipped with electronic slowdown at the end of the opening and closing cycle providing protection to the barrier mechanism.
The 620 range is also available in stainless steel to offer higher corrosion protection for the most demanding environment. Use of cutting edge materials and treatments such as cataphoresis and niploy plus tried and tested FAAC hydraulic technology all combine to ensure long life.
620 TECHNICAL SPECIFICATIONS
 |
|
|
|
|
|
 |
|
||||
 |
Power supply: |  |
230v~+ 6%/-10% 50-60 Hz |  |
|
 |
 |
|
|||
| Electric Motor: | Single phase, bi-directional | |
|||
 |
 |
|
|||
| Absorbed power: | 220W | |
|||
 |
 |
|
|||
| Current drawn: | 1A | |
|||
 |
 |
|
|||
| Motor winding thermal cutout: | 120°C | |
|||
 |
 |
|
|||
| Anti-crush system: | hydraulic valves (by-pass) | |
|||
 |
 |
|
|||
| Duty cycle: | 620 Standard 70% rated 620 Rapid 100% rated 620 Super Rapid 100% rated |
|
|||
 |
 |
|
|||
| Mechanical deceleration: | adjustable | |
|||
 |
 |
|
|||
| Operating Temperature Range: | -20°C + 70°C | |
|||
 |
 |
|
|||
| Weight: | 73Kg | |
|||
 |
 |
|
|||
| Oil type: | FAAC HP OIL | |
|||
 |
 |
|
|||
| Barrier Opening Times: | 3.5 secs - 4.5 secs (Standard) 2 - 3 secs (Rapid) 0.8 secs (Super Rapid) |
|
|||
 |
 |
|
|||
| Beam Length: | standard up to 5m rapid up to 4 m super rapid up to 3m |
|
|||
 |
 |
|
|||
| Casing anti corrosion treatment: | cataphoresis | |
|||
 |
 |
|
|||
| Finish: | polyester paint, RAL 2004 | |
|||
 |
 |
|
|||
| Housing protection: | IP55 | |
|||
 |
 |
|
|||
| Cooling: | Rapid & Super Rapid are fan cooled | |
|||
 |
|
||||
 |
|
||||
| Articulated beam: | |
||||
| Standard to 4m Rapid to 3m |
|
||||
 |
|
||||
 |
|
||||
| Optional accessories: | |
||||
| - beam articulated kit - skirt kit - fork support - automatic release solenoid valve - anti vandal valve |
|
||||
 |
|
||||
Built in intelligence for increased flexibility Whilst microprocessor control and surface mount technology are the standard, the 624 BLD is a fully programmable control board.
There are 3 programming buttons with a 2-digit display on the control board, which allow the setting of parameters to achieve the required logics for operation. A master / slave configuration is programmed through the controls rather than adding any additional device.
Known for the extensive range of high quality products and innovative manufacturing techniques, FAAC continue to engineer reliable, versatile, cutting edge automation systems, chosen for residential and commercial installations on a worldwide basis.
Providing high quality automation systems for gates, barriers, doors, parking and access control products, FAAC is the leading brand in the automation market.
INTERIOR AND DIMENSIONS
640 Range Fast Acting Hydraulic Barrier System
for Large Industrial Accesses up to 7 metres
The 640 barrier system has a neat slimline appearance, is robust and reliable for commercial applications. |
The 640 Range - Barrier for beams up to 7m. - For large industrial access applications
INSTALLATION LAYOUT
|
|
|
|
|
|
|
|
|
|
||||||
|
Low voltage cabling | |
Power cabling 230V | |
|
||
|
|
|
|||||
|
3 cables 3 x 0.5 1 cable 2 x 0.5 |
|
1 cable 2 x 1.5+T 1 cable 2 x 1.5 |
|
|||
|
|
|
|||||
| NB: Cable diameters in mm2 | |
||||||
|
|
||||||
1. FAAC 640 with built in 624 BLD control board
2. Beam
3. FAAC LIGHT
4. FAAC T10
5. FAAC
FOTOSWITCH
The 640 range is the natural choice for heavy traffic management and larger commercial applications.
This system can be customised to enhance site suitability with a range of options including a pivoting foot, automatic release solenoid valve, and forked support and skirt. It is recommended that a beam fork support or end support is installed for beams of 5m and above.
The 640 series has a neat slimline appearance yet is robust and hardwearing for commercial applications. The range also provides the reassurance of anti-crush hydraulics, a secure locking system for both open and closed positions and manual release with customised key.
Whilst Microprocessor control and Surface Mount technology are the standard, the 624 BLD is a fully programmable control board. There are 3 programming buttons with a 2-digit display on the control board, which allow the setting of parameters to achieve the required logics for operation. A master/slave configuration is programmed through the controls rather than adding any additional device.
The 640 is the latest generation of barrier systems from FAAC (UK) Ltd. It is also available in stainless steel.
640 TECHNICAL SPECIFICATIONS
 |
|
|
|
|
|
 |
|
||||
 |
Power supply: |  |
230v~+ 6%/-10% 50-60 Hz |  |
|
 |
 |
|
|||
| Electric Motor: | Single phase, bi-directional | |
|||
 |
 |
|
|||
| Absorbed power: | 220W | |
|||
 |
 |
|
|||
| Current drawn: | 1A | |
|||
 |
 |
|
|||
| Motor winding thermal cutout: | 120°C | |
|||
 |
 |
|
|||
| Anti-crush system: | Hydraulic valves (by-pass) | |
|||
 |
 |
|
|||
| Duty cycle: | 100% | |
|||
 |
 |
|
|||
| Mechanical deceleration: | Adjustable | |
|||
 |
 |
|
|||
| Operating Temperature Range: | -20°C + 70°C | |
|||
 |
 |
|
|||
| Weight: | 84Kg | |
|||
 |
 |
|
|||
| Oil type: | FAAC HP Oil | |
|||
 |
 |
|
|||
| Barrier Opening Times: | 4 - 8 secs | |
|||
 |
 |
|
|||
| Beam Length: | 4 - 7metres | |
|||
 |
 |
|
|||
| Casing anti corrosion treatment: | cataphoresis | |
|||
 |
 |
|
|||
| Finish: | polyester paint, RAL 2004 | |
|||
 |
 |
|
|||
| Housing protection: | IP55 | |
|||
 |
 |
|
|||
| Cooling: | forced ventilation with fan | |
|||
 |
 |
|
|||
| Optional accessories: | - skirt kit, - fork support - automatic release solenoid valve - anti vandal valve - top and bottom skirt up to 5m |
|
|||
 |
|
||||
Known for the extensive range of high quality products and innovative manufacturing techniques, FAAC continue to engineer reliable, versatile, cutting edge automation systems, hosen for residential and commercial installations on a worldwide basis. Providing high quality automation systems for gates, barriers, doors, parking and access control products, FAAC is the leading brand in the automation market.
INTERIOR AND DIMENSIONS
To arrange a survey to determine your requirements please click HERE