follow us on facebook find us on LinkedIn join us on google+ watch us on You Tube Telephone 01604 212500 01604 212500
stanley DURA-GLIDE slh slimline automatic sliding doors

Dimensions & specification

HEADER SIZE: 116mm high x 175mm deep
TYPICAL PACKAGE HEIGHT: 2300mm to 2700mm
WIDTH: Single slide up to 3100mm. Bi-part up to 4300mm
DRIVE SYSTEM: 1/4 HP DC motor, gear drive, toothed belt
CONTROLLER: Microprocessor based, safety logic, watchdog LED
STANDARD Silver anodised aluminium (SAA) Powder coated finish (PPC) to a standard RAL or BS colour
SPECIAL Powder coated finish (PPC) to a non-standard RAL or BS colour Bronze anodised aluminium Stainless steel cladding

The Stanley Dura-Glide SLH uses the proven motor and drive assembly from the Dura-Glide series, engineered to accommodate the new low profile design. Available for surface applications only and each operator is supplied with standard hangers for aluminium door panels with optional hangers offered for glass doors.

Door clear opening example Door clear opening calculation


To ensure safe operation, long term reliability and working efficiency, a powered door installation should be regularly maintained by the powered door system authorised technician in accordance with the recommendations of BS EN16005 2012.

Because automatic door operators are electromechanical pieces of equipment and microprocessor controlled, we recommend they be serviced at least every six months from date of installation.

All parts supplied and installed by us are covered by a 12 month warranty for faulty components (unless due to misuse, abuse or negligence, etc.) providing the doors are regularly serviced by an approved authorised technician.


The Specifier should ensure that equipment specified for a door installation conforms to the recommendations of the standard.

At the design specification stage, the Specifier should seek specialist advice from, and work in close liaison with, the powered door manufacturers or their approved distributors.

It is particularly important that the Specifier should establish predicted user requirements to enable account to be taken of the volume and type of pedestrian traffic (such as the elderly, the infirm, disabled persons and young children) that is likely to pass through the particular installation at different times of the day.


When installing onto an aluminium shopfront or curtain wall screen the SLH only requires a 125mm high transom bar, which will offer sufficient space for the lid to open - especially if the header is fitted close to the ceiling.

The SLH is easy to install by first fitting the mounting plate to the desired position on the wall or aluminium screen. The SLH header is simply lifted onto the mounting plate and safely secured by two locating screws.

Mounting plate

The bracket has a built-in channel for cables, and additional channels are built into the operator head making for tidy cable installation.

The lid can be locked into the open position for ease of wiring and maintenance.

Stanley Dura-glide SLH
CHAS Accredited Supplier Safe Contractor Accredited Investors in People Certificate ADSA Accredited Altius Accredited Exor Accredited Construction Line Accredited Reset Certificate
BIM Object